Cable sizing calculation: how cables are sized to BS 7671
Every circuit in an installation needs a cable that can carry its current safely, keep voltage drop within limits and let the protective device disconnect quickly under a fault. A cable sizing calculation checks all three.
The main steps
- Design current: the current the circuit will carry, after diversity.
- Protective device: a rating at least equal to the design current.
- Correction factors: grouping, ambient temperature, thermal insulation and installation method reduce what a cable can carry.
- Voltage drop: checked against the BS 7671 limits for lighting and other circuits.
- Earth fault loop impedance: confirms the device will disconnect within the required time.
Why get it designed
Long sub-mains, heat pump and EV charger circuits are where undersized cables most often appear. Getting these right on paper avoids failed tests and expensive replacement.