← All guides

Heating design and underfloor heating design

MEPquotes guide · reviewed by a Chartered Engineer

Heating design starts with how much heat each room loses, then sizes the heat source, emitters and pipework to match. With heat pumps now common, low flow temperatures make careful design more important than ever.

Heating design and underfloor heating design – Heating design stepsHeating design steps1Heat lossRoom by room2Flow temp45°C or lessfor heat pumps3EmittersRadiators orunderfloor4PipeworkSizing andbalancing5ControlsZones andscheduling

The steps

  1. Room-by-room heat loss calculation.
  2. Choice of flow temperature, ideally 45°C or below for heat pumps.
  3. Emitter sizing: radiators sized for the flow temperature, or underfloor heating loops.
  4. Pipework sizing, pump selection and hydraulic balancing.
  5. Controls and zoning.

Underfloor heating design

Underfloor heating design sets pipe spacing, loop lengths and manifold positions for each room, checked against floor finishes. Getting it right means even temperatures and a heat source that runs efficiently.

Get an instant budget cost using MEPquotes